Channel Cable Tray, Cable Trunking Tees, Cable Trunking - CT-056

Channel Cable Tray

• Product:
  Cable Trunking Tee
  
  
• Model Number:
  CT-056
  
  
• Description:
  Brief Introduction of Cable Tray Systems:
  A cable tray system, according to the US National Electrical Code, is "a unit or assembly of units or sections and associated fittings forming a rigid structural system used to securely fasten or support cables and raceways." Cable trays are used to hold up and distribute cables.
  
  Cable trays are widely used as temporary usage of electric power in building site, industry and mining enterprise, decoration and mending where adopt the electric power of 220V and 380V.
  
  
  Channel Cable Trays are suitable for electrical cable, controlling cable, lighting cable and distributing line with the voltage under 10KV. It can be installed with technological line, suspended above the floor or under beam, and also can be installed on the inside or outside wall or the sidewall of tunnel and cable ditch.
  
  Features and Benefits of Channel Cable Trays:
  1. Requires NO bending or cutting
  2. Acts as a continuous ground conductor; no grounding splices
  3. Adapts to difficult architectural designs, accommodates changes in direction and elevation of cable runs
  4. Cuts installation time up to 50 percent.
  5. Provides strength, rigidity without additional hardware.
  6. Has smooth edges to avoid any cut in both the wire and the installer.
  7. Galvanized, powder coated or hot dip galvanized finishes to minimize corrosion.
  8. All support hardware available.
  9. Custom sizes and materials available.

  Design of Channel Cable Trays:

  Can run two different types of cables by two individual channels. Cable Trunkings are available in all materials.

  It's connected by Horizontal Elbow, Horizontal Tee, Horizontal Cross, Horizontal Reducer, Vertical Elbow Up / Vertical Elbow Down, Reducer etc.

  Two Types: Fulclose Type (with covers) Ventilated Type.

  Manufacturing:

  Optional Material: Black Steel, Stainless Steel, Aluminium, Alloy, Plastic, Fibreglass Reinforced Plastic (FRP)

  Mode: perforated / non-perforated

  Surface Finish: Zinc-plating, Hot-dip Galvanizing (HDG), Powder-coated, Painting

  Color: Optional

  We are able to design styles in various specifications according to the drawings and/or samples by the clients.

  
  
  Learn more about products detailed description, pricing and service, Please send mail to us!